Back to top
07971549216
Send SMS    Call Me Free Send Inquiry

Wire Wound Resistors

Ergonomically designed Wire Wound Resistors serve as passive electrical components to control current. Notable for their tube shaped appearance, these resistors are equipped with solder plated leads that have copper wires. Offered with varnish coated surface, these resistors are reckoned for their excellent low temperature co efficiency level, standard operating temperature range, wide resistance tolerance level and flame proof surface. Ceramic fabricated welded structure of these resistors is wound with alloy made wires. Low noise operation, stability of high temperature and long service life are some of the key factors behind increasing demand of these Wire Wound Resistors among customers.
Product Image (LR11 (Axial))

LR 1 Axial1 Watt 10 Watts 0.1 Ohms to 30K Ohms

Price: 5.00 - 20.00 INR/Piece

LR 11 (Axial) 1 Watt - 10 Watts , 0.1 Ohms to 30K Ohms

Product Image (RC Network RC11)

RC Network - RC11 (0.1uF to 0.47uF 1000VDC to 2000VDC 10 Ohms to 100 Ohms 5 W to 10 W)

Price: 200.00 - 500.00 INR/Piece

RC Network - RC11 (0.1uF to 0.47uF ; 1000VDC to 2000VDC ; 10 Ohms to 100 Ohms 5 W to 10 W)

Product Image (LR-15)

Adjustable Wire Wound Resistors

Price: 100.00 - 2000.00 INR/Piece
  • Application:Electrical & Electronics
  • Color:as shown in the image
  • Features:High Quality
  • Frequency:50 Hertz(Hz)
  • Function:Electrical & Electronics Equipment
  • Input:AC/DC
  • Power Source:AC/DC
  • Size:Standard
Product Image (LR11 (Radial))

LR11 (Radial) - 15 Watts - 500 Watts

Price: 50.00 - 2000.00 INR/Piece

LR11 (Radial) - 15 Watts - 500 Watts ; 0.1 Ohms to 85 K Ohms

Product Image (LC - 11)

Low Wattage Wire Wound Resistor

Price: 5-300 INR/Piece
  • Application:Low Power Electronics, Voltage Division, Current Control
  • Color:Green (Body Color with Color Bands)
  • Function:Current Limiting, Voltage Dropping, and Circuit Protection
  • Power Supply:AC/DC
  • Product Type:Wire Wound Resistor
  • Rated Voltage:Up to 250V
  • Size:Standard sizes: 0.25W, 0.5W, 1W, and 2W (body lengths vary)
  • Usage:Suitable for electronic circuits, laboratory and industrial applications
Product Image (LR-16)

Non-Inductive Wire Wound Resistors

Price: 50.00 - 2000.00 INR/Piece
  • Components:Wire Wound Element, Ceramic Core, Metal End Caps
  • Features:Non-inductive design, Low noise, High stability, Flame retardant
  • Frequency:DC to high frequency usage
  • Input:Electrical Signal
  • Interface:Axial Leads
  • Operating Temperature:-55C to +350C
  • Supply Voltage:Up to 500V AC/DC
  • Weight:Approximately 2-15g (depending on rating)
X